Port of Progreso

PortsLast updated: 31 August 2026

Progreso is an open-roadstead anchorage in Mexico, registered under the UN/LOCODE code MXPGO.

This is a directory stub generated from the UN/LOCODE registry; a fuller write-up has not yet been added.

Port characteristics

Size / type
Very small, Open roadstead
Shelter
Fair
Entrance restrictions
Affected by other factors
Overhead limitations
Bridges or power cables present
Charted depths
  • Channel11.0–12.2 m (36–40 ft)
  • Anchorage7.9–9.1 m (26–30 ft)
  • Cargo pier11.0–12.2 m (36–40 ft)
  • Oil/LNG terminal11.0–12.2 m (36–40 ft)
Terminal infrastructure
  • Cargo handlingCargo pier charted (11.0–12.2 m (36–40 ft))
  • Oil / LNG handlingOil/LNG terminal charted (11.0–12.2 m (36–40 ft))

Container-terminal handling is not classified by the WPI dataset, so this entry does not infer it.

Mean tidal range
0 m
Max. vessel size
Over 152 m (500 ft) length
Also noted
good holding ground; turning area available

Facilities and services

The port has a U.S. representative and requires an ETA message. Pilotage is compulsory and available. Assist tugs are available. Other quarantine services is available. Communications include telephone, radio, air, and rail. Cargo can be worked at wharves, anchor, and Mediterranean moor.

The port offers medical facilities, garbage disposal, and dirty ballast reception. Fixed, mobile, and floating cranes are available, with lift capacity of over 100 tons. Available services include longshore labor, navigation equipment repair, and electrical repair. Supplies on offer include water and fuel oil.

Repair capability is rated moderate and a small marine railway.

Notes and references

  1. NGA Pub. 150, World Port Index, 27th ed. (2019), index no. 9510, Pub. 148. Port characteristics are historical reference data; verify current depths, restrictions, facilities, and services with official notices.
  2. NGA World Port Index database (WPI.mdb), 2019. Facilities and services data.
  3. Record status: WPI-classified port.