# Seawater arrival draft

> A ship's expected or observed draft on arrival in seawater, using the arrival loading condition and local density.

## Record

- Record type: Encyclopedia entry
- Canonical page: https://admiralsatlas.com/en/ship-technical/seawater-arrival-draft/
- Last updated: 2026-10-06

## Article

**Seawater arrival draft (SWAD)** is the draft expected or measured when a ship reaches a port or anchorage in seawater. At the **same displacement**, a ship floats less deeply in denser seawater than in fresh water. Actual seawater density is not identical everywhere, so a precise calculation uses the local density and the ship's hydrostatic data.

Arrival draft also depends on the weight aboard at arrival. Fuel use, ballast transfers, cargo changes, and stores may alter displacement between departure and arrival. Port clearance should therefore use the arrival condition and local limits, rather than treating a draft measured earlier in a different water density as the arrival figure.

## Sources

- [UK Maritime and Coastguard Agency: Draft changes with water density](https://www.gov.uk/government/publications/second-engineer-written-examination-syllabuses/naval-architecture-written-examination-syllabus)
- [IMO: Ship-port data, water density and allowable draft](https://greenvoyage2050.imo.org/ship-port-interface-measures-portal/)
